Plastic pallets

LOGIC 1208-H1

MONOBLOC EURO PALLET H1 MODEL WITH 3 RUNNERS

New MONOBLOC EURO PALLET H1 MODEL WITH 3 RUNNERS
  • -20º/40ºC [-4º/104ºF] -20º/40ºC [-4º/104ºF]
  • open open
  • 4-ways 4-ways

Quantity to quote

Download data sheet
One-piece Euro pallet coming from H1 pallet but in recycled material, with standard dimensions and high load capacity, ideal for reuse applications. Suitable for any type of load in all types of uses and sectors. Compatible with all standard handling equipment.

Technical data

ReferenceAvailable MaterialsMeasuresweight
CLEAN 1208-H1
-20º/40ºC [-4º/104ºF] -20º/40ºC [-4º/104ºF]
1200x800x160 mm [47.20x31.50x6.30"] 18.00 kg [31.70 lb.] 5000 kg [11025 lb.] 1250 kg [2755 lb.] 1000 kg [2210 lb.]
LOGIC 1208-H1
-20º/40ºC [-4º/104ºF] -20º/40ºC [-4º/104ºF]
1200x800x155 mm [47.20x31.50x6.10"] 16.25 kg [35.80 lb.] 5000 kg [11025 lb.] 1250 kg [2755 lb.] 650 kg [1435 lb.]

Advantages

Suitable for rack
Anti-impact perimeter
High performance for a lower cost
Anti-slip rim 7mm

Logistic data

Reference20'40'40' HC45'
CLEAN 1208-H1143325400528528594684
LOGIC 1208-H1165375425561561594684

Options

Customizable colour
Silkscreen logo
Engraved logo
Version available without Rims

Technical drawing

Recommendations for use

  • Do not stack more than 48 pallets, which equates to a height of 7,4 m of empty pallets. 
  • Do not handle stacks of more than 18 empty pallets. 
  • Once stacked in height check that they are properly fitted.

The values indicated are approximate and are based on both practical experiences and ISO 8611 tests with a uniformly distributed standard load, distributed all over the pallet surface, duly consolidated, compact and stable and at ambient temperature (20ºC [68ºF]) for a specific time. Different load conditions produce different values that have to be checked at the customer’s request. Any deterioration or breakage in the pallet may vary these results.

Due to the characteristics of the materials recycled, the dimensions and the weight of the pallets may present certain tolerances. Dimensional tolerances according to DIN ISO 2768-V and weight tolerances: +/- 4%. Except for references of the FLAT category: +/- 3%.

- Nortpalet reserves the right to modify any information herein indicated without prior notice.

- The specifications can be affected in case of alteration of the product with parts and / or materials different from those approved by the Nortpalet quality department. Any warranty, specification or liability on the part of Nortpalet will be terminated in case of modification of the product with spare parts not supplied by Nortpalet.

Other products of the same range